|
 Single
polyclad freestanding structure
Grower
Starter House 20X96FS/DP/PCSS
This package provides the grower with a totally
enclosed single poly clad for the roof and 8 mm twinwall
polycarbonate on the ends. The dimensions are 20 feet
wide X 96 feet long. A detailed description is
below.
If
you wish to complete this form we can follow up with an
confirmation quotation and an freight quote.
Grower
Starter House 20X96FS/DP/DP/PCSS
This package provided the grower with a totally
enclosed double poly clad structure with two roll up
sidewalls.
This
package includes a series FS freestanding structure that
is 20feet wide X 96 feet long.
The series FS structure is provided with gothic shaped
reinforced arches and arch uprights placed at 6 feet on
center along the length of the structure. Our polysaver
ridge purlin system is included plus 4 runs of roof
purlins ( which are clamped on the inner cord of the arch
- away from the poly ). Each corner is provide with
windbracing. Foundation ground sleeves are provided for
each arch set. The end arches are provided with factory
installed wire lock. Aluminum base plates c/w built-in
wire lock is provided to secure the poly along the
sidewall. ( Our aluminum base plate is a structural
member - there is no need for a wooden base plate. ) 10
mm single layer reinforced poly roofing is provided. Both
gable ends are provide with metal framing members and
double poly cladding. One end is provided with a 8'X8'
double door package which is clad in Twinwall
polycarbonate. Door package includes door frame, hinges,
latches and door stop. Wire lock is provided on the gable
ends to secure the poly.
If
you wish for us include extra items into our quotation
such as heating, horizontal air flow, controls etc.
please indicate in the above fill in box.
List
Price of package $9,200.00 Canadian / $ 6,349.00 US
Web Pricing of package $ 8,650.00 Canadian / $5,967.00
US
Double poly vent system
If you wish to add 96 foot long double poly roof vent
system add $2754.00 Can/$1900.00 US
If you wish to add a manual gear box for the above add
$123.00 Can/$84.00 US
Fan and Shutter Cooling
If you wish to add a GCS48DAY, 48" belt drive slant
wall fan rated at 20,000 CFM air flow with 1 hp/120/1/60
motor , add $1193.00 Can/$823.13.00 US.
If you wish to add motorized shutters 2 - 36" X 36",
added $ 532.00 Can/$367.00 US
The above exhaust air flow rate is based on one air
change on 10 foot height
= 20 X 96 X 10 = 19,200 CFM. So the above fan selection
will provide you with good air flow for cooling.
Pricing
is FOB Saint Catherines, Ontario.
We
accept both US and Canadian Funds.
Back
to freestanding packages
|